基于MetropolisQ学习的蜂窝网络在线信道分配

针对现有的蜂窝网络的在线动态分配模型具有的信道需求量大、呼叫动态变化时阻塞率高和收敛速度慢的缺点,设计了一种基于MetropoisQ学习的蜂窝网络的在线信道分配方法。首先,在考虑同信道限制、邻居信道限制和同小区限制的基础上,设计了在线信道分配的数学模型,然后在Q-Learning算法基础上的设计了一种基于资格迹的Q(λ)算法实现信道的在线分配,为了进一步提高收敛速度,采用Metropois规则对算法中动作的选择方式进行改进,实现探索和利用的平衡。为了验证文中方法,采用Matlab工具上进行实验,仿真实验结果表明文中方法能实现蜂窝通信网络的在线信道分配,且与其它方法比较,具有较少的信道需求量、较低的阻塞率和收敛速度,较其它方法具有较大优越性。     

结构可靠度计算中的描述性抽样法

本文提出描述性抽样方法的实质，即利用更少的时间抽取更多的服从要求概率分布的样本点，讨论了该方法的计算步骤和适用范围，并将描述性抽样方法与重要抽样方法结合起来计算多变量多模式的结构失效概率，比较了描述性抽样方法与一般抽样法的方差，算例结果表明描述性抽样方法具有较好的收敛性．     

Wall Versus Centerline Polymer Injection in Turbulent Channel Flows

This experimental study compares the mean and turbulence characteristics of turbulent channel flows with polymer injection at the wall and at the centerline to assess the impact of the injection location on drag reduction. It also contrasts the drag reduction performance of a hydrolyzed polymer versus a non-ionic polymer under the same conditions. Wall injection of non-ionic and hydrolized polymers resulted in 23% and 9% larger drag reduction than corresponding centerline injection, respectively. In all cases, the polymer was structured and the presence of macromolecular polymer structures, even when concentrated mostly away from the wall, seemed to be able to affect the turbulence structure in the flow.     

Water Impingement on a Vertical Wall due to Discontinuity Decay Above a Drop

The paper reports experimental data on the height of water impingement on a vertical wall during wave reflection due to discontinuity decay above an even bottom and a bottom drop. It is shown that for a bore type wave with a roller in its head, propagating over finitedepth water, the impingement height is proportional to the initial difference in freesurface level. In the case of a dry bottom in the tail water, this is also true for other types of waves formed during discontinuity decay.     

Thermally Developing Forced Convection in a Porous Medium: Circular Duct with Walls at Constant Temperature,with Longitudinal Conduction and Viscous Dissipation Effects

A modified Graetz methodology is applied to investigate the thermal development of forced convection in a circular duct filled by a saturated porous medium, with walls held at constant temperature, and with the effects of longitudinal conduction and viscous dissipation included. The Brinkman model is employed. The analysis leads to expressions for the local Nusselt number, as a function of the dimensionless longitudinal coordinate and other parameters (Darcy number, Péclet number, Brinkman number).     

Turbulent Channel Flow with an Artificial Two-Dimensional Wall Layer

Turbulent flow of an incompressible fluid in a plane channel with parallel walls is considered. The three-dimensional time-dependent Navier-Stokes equations are solved numerically using the spectral finite-difference method. An artificial force which completely suppresses lateral oscillations of the velocity is introduced in the near-wall zone (10 % of the channel half-width in the neighborhood of each wall). Thus, the three-dimensional flow zone, in which turbulent oscillations can develop, is separated from the wall by a fluid layer. It is found that the elimination of three-dimensionality in the neighborhood of the walls leads to a significant reduction in the drag. However, complete laminarization does not occur. The flow in the stream core remains turbulent and can be interpreted as a turbulent flow in a channel with walls located on the boundary of the two-dimensional layer and traveling at the local mean-flow velocity. The oscillations developing inside the two-dimensional layer, which have significant amplitude, distort the flow only in the adjacent zone. Beyond this zone the distributions of the mean characteristics and the structure of instantaneous fields completely correspond to ordinary turbulent flow in a channel with rigid walls. The results obtained confirm the hypothesis of the unimportance of the no-slip boundary conditions for the fluctuating velocity component in the mechanism of onset and self-maintenance of turbulence in wall flows.     

压力梯度对湍流逆梯度输运的影响

研究Birkhoff系统的一般Lie对称性导致的非Noether守恒量. 得到非Noether守恒 量的存在定理，举例说明结果的应用.     

Analysis of nano channel formation in quartz cubes by laser-induced process

A novel laser processing technique was developed for making channels in the nano regime in this paper. A Nd:YAG laser was used to dry fabricate micro channels (25μm～100μm di ameter) in a 1 cm^3 fused silica substrate by thermal-induced processing. By controlling the locations of these initiating micro channels on a silica cube, 1D-controllable self-connecting nano fractures can be formed as rectangular channels. These nano channels are smooth and with extremely high aspect ratio (～10^4 depth to width ratio). A possible mechanism is proposed to explain the formation of the nano channels. This laser-based nano channel fabrication technique is fast and inexpensive, and with potential applications in capillary electrophoresis and electro-osmosis driven nano-filtration.